Fogging System

Semicentral Fogging Systems

• It is designed on the based on the heat load of the department and can achieve RH% UP TO 85% in the department.
• It will consist of one no fan with casing with wall mounted fan with 5/7.5/10/15 hp motor, and we filter grouted in masonry chamber behind the fan so that filtered will be sucked by fan and fogging box will be mounted in department from the mouth of the box we can mount duct with grills on the both side of duct.

Advantage:

• In humidification only RH can be achived but we can connect small chiller of 3 to 10 toon depending on department heat load and can maintain department temp. Less then outside wet bulb. 60 to 70% less poer consumed compare conventional chilled water spray type air condition.
• Power saved in pump hp and supply air fan hence less running cost. Very less construction required hence capital investment reduces.